Original Bicycle Tail Kit for DJI Osmo 360

1. Pair with an invisible selfie stick (not included) to easily capture stunning third-person panoramic riding views
2. Supports quick adjustment of multiple angles for flexible shooting angles
3. Double-end support design for stability and reliability
4. Package contents:
- Osmo Action bike mount x 1
- Bike seat post clamp adapter x 1
- Large-radius bicycle seat post clamp x 1
- Small-radius bicycle seat post clamp x 1
- Rear selfie stick mounting clamp x 1
- M4 screws x 2
- M5 long screws x 2
- M5 short screws x 2
- Osmo locking screws x 2
- 1/4 inch threaded to two-claw adjustable adapter x 1
- Bicycle seat post scratch-resistant silicone ring x 2
- Hex wrench x 2
- Screw wrench x 1

Parameters:
1. Osmo Action bike seat mount:
- Size: about 63.1mm long, 32.5mm wide, and 19.7mm high
- Weight: about 47.0g
2. Bike seatpost clamp adapter:
- Size: about 51.5mm long, 41.9mm wide, and 28.0mm high
- Weight: about 30.0g
3. Bike seatpost large curved clamp:
- Size: length about 51.5mm, width about 28.0mm, height about 8.2mm
- Weight: about 15.0g
4. Small curved clamp for bicycle seat post:
- Size: about 51.5mm long, 28.0mm wide, and 11.6mm high
- Weight: about 18.2g
5. Rear selfie stick clamp:
- Size: about 176.5mm long, 59.6mm wide, and 35.0mm high
- Weight: about 137.9g
6. Osmo locking screw:
- Size: about 55.6mm long, 23.0mm wide, and 13.3mm high
- Weight: about 20.7g
7. 1/4 inch thread to two-claw adjustable adapter:
- Size: about 38.5mm long, 28.0mm wide, and 28.0mm high
- Weight: about 21.6g
8. Screw locking wrench:
- Size: about 96.6mm long, about 52.7mm wide, and about 15.9mm high
- Weight: about 7.4g

Friendly reminder:
1. Before use, please carefully check that the camera is securely installed to prevent it from falling off due to prolonged shaking while riding
2. When shooting with the seat post, be sure to use it with the rear selfie stick clamp. Do not use the seat post mounting bracket alone to secure the selfie stick
3. When shooting from the side rear of the seat post, pay attention to road safety while riding to avoid hitting pedestrians or being hit by other vehicles. When mounted on the side, the selfie stick must not exceed the width of the bicycle handlebars, and the rear extension length must also comply with local regulations
4. For safety reasons, the seat post mount is only suitable for riding on flat roads, and we recommend a maximum riding speed of 60 km/h. Do not use on bumpy roads such as mountain roads or muddy roads. Be sure to tighten the auxiliary support clamp before riding
5. We recommend using it with an invisible selfie stick. It is not compatible with the Osmo 2.5-meter extra-long carbon fiber selfie stick
6. Please strictly follow the operating instructions in the manual when using accessories. Do not modify or alter the structure of the accessories without authorization
7. Please ensure you are familiar with and comply with the road safety and traffic laws and regulations in your area. If local laws and regulations have special provisions regarding the use and installation of seat arches or seat brackets, please strictly follow the relevant requirements for use and installation